Kunshan Sochi Electronics Co.,Ltd
One-stop solution for PCB equipment/accessories/consumables
Add to Cart
Product Datas:
| Spindle Quantity | 1 |
| Machine Dimension | 1710*2100*1605mm |
| X,Y,Z-axis Stroke | 560mm*700mm*40mm |
| X,Y-axis Drive | Imported High-power servo motor(Guaranteed transmission speed) |
| Z-axis Drive | Imported servo motor |
| Feed Rate X,Y-axis | 60m/min |
| Feed Rate Z-axis | 30m/min |
| Max. Working Area | 560mm*700mm |
| Drilling Diameter | Φ0.2mm-Φ6.35mm |
| Drilling Accuracy | ±0.025mm |
| Positioning Accuracy | ±0.004mm |
| Replicate Positioning Accuracy | ±0.0025mm |
| Spindle Speed | 160-180krpm ABL/Westwind(Optional) |
| Max. Drilling speed | 480-550hole/min |
| Spindle cooling method | Water cooling |
Notes:
The drilling speed depends on the thickness of the plate, the number of plates and the hole size. The drills on the 2*1.6mm PCB,for 0.3 holes the drilling speed is more than 460 holes/min； 0.5 holes,and the drilling speed is more than 510holes/min.
Our Service:
Working Conditions:
| Power Supply: | 3PH 15KVA |
| Temperature: | 22±2℃/45%-65% |
| Air Pressure: | 6.5-7.5bar |
Descriptions:
Customized & new generation PCB drilling machine
QIC System: Large and small pressure foot switching function to ensure small PCB board’s accuracy.
The CBDT electric contact automatic detection broken tool function is the timely response, and the hole can be
used to monitor the edge collapse. It can be used as a fast drilling function.
Spindle configuration:
ABL/WESTWIND 160-180KTDM High-speed air-floating spindle for stable 100μm micro-hole machining,
good macro hole and slot machining.
Drive System:
Imported high-function, high-torque motor to ensure fast transmission speed.
Transmission system:
Japan NSK high precision lead screw (fast, quiet)
German Rexroth P-precision Linear Guideway(High precision,long lasting)
Tool magazine selection
Upper-tool magazine:
Capacity 220 / pcs/ axis, can achieve full diameter tool without collar, short tool change time, easy to
operate the upper and lower plates, don’t rotate the tool change.
More pictures: